IntensityMeshSeries Methods |
The IntensityMeshSeries type exposes the following members.
Methods| Name | Description | |
|---|---|---|
 | CheckSurfaceSizeForGPU |
Check if the given surface size can be used with the GPU.
GPU index buffer capacity is verified.
(Inherited from IntensitySeriesBase.) |
| Clear |
Clears the series. Initializes Data with InitialValues.
Sets the data point colors to BaseColor.
(Inherited from IntensitySeriesBase.) |
| ClearValue(DependencyProperty) | Clears the local value of a property. The property to be cleared is specified by a DependencyProperty identifier. (Inherited from DependencyObject.) |
| ClearValue(DependencyPropertyKey) | Clears the local value of a read-only property. The property to be cleared is specified by a DependencyPropertyKey. (Inherited from DependencyObject.) |
| Clone | Creates a modifiable clone of the Freezable, making deep copies of the object's values. When copying the object's dependency properties, this method copies expressions (which might no longer resolve) but not animations or their current values. (Inherited from Freezable.) |
| CloneCurrentValue | Creates a modifiable clone (deep copy) of the Freezable using its current values. (Inherited from Freezable.) |
| CoerceValue | Coerces the value of the specified dependency property. This is accomplished by invoking any CoerceValueCallback function specified in property metadata for the dependency property as it exists on the calling DependencyObject. (Inherited from DependencyObject.) |
| CreateNewDataArray |
Create new data array.
(Inherited from IntensitySeriesBase.) |
| Dispose |
Release all resources used by this instance.
(Inherited from ChartNode.) |
| Equals | Determines whether a provided DependencyObject is equivalent to the current DependencyObject. (Inherited from DependencyObject.) |
| Freeze | Makes the current object unmodifiable and sets its IsFrozen property to true. (Inherited from Freezable.) |
| GetAsFrozen | Creates a frozen copy of the Freezable, using base (non-animated) property values. Because the copy is frozen, any frozen sub-objects are copied by reference. (Inherited from Freezable.) |
| GetClipAreas |
Get clipping areas.
(Inherited from SeriesBaseXY.) |
| GetContourRoutes |
Get Contour to the List of levels, which is List of polylines/routes.
The contour lines are rebuild with current palette steps' value and color.
(Inherited from IntensitySeriesBase.) |
| GetCurrentValueAsFrozen | Creates a frozen copy of the Freezable using current property values. Because the copy is frozen, any frozen sub-objects are copied by reference. (Inherited from Freezable.) |
| GetDataColor |
Get Data array color
(Inherited from IntensitySeriesBase.) |
| GetDataValue |
Get Data array value.
(Inherited from IntensitySeriesBase.) |
| GetDataXValue |
Get Data array X value.
(Inherited from IntensitySeriesBase.) |
| GetDataYValue |
Get Data array Y value.
(Inherited from IntensitySeriesBase.) |
| GetHashCode | Gets a hash code for this DependencyObject. (Inherited from DependencyObject.) |
| GetLocalValueEnumerator | Creates a specialized enumerator for determining which dependency properties have locally set values on this DependencyObject. (Inherited from DependencyObject.) |
| GetMinimumsAndMaximums |
Get minimums and maximums of Series X, Y and data Values.
(Overrides IntensitySeriesBaseGetMinimumsAndMaximums(Double, Double, Double, Double, Double, Double).) |
| GetType | Gets the Type of the current instance. (Inherited from Object.) |
| GetValue | Returns the current effective value of a dependency property on this instance of a DependencyObject. (Inherited from DependencyObject.) |
| InvalidateColorsOnly |
Invalidate colors only. Use this together with Optimization = DynamicValuesData.
Does not update the geometry to the GPU when not needed, allowing significantly faster rendering.
(Inherited from IntensitySeriesBase.) |
| InvalidateData |
Series data has been modified directly by its array.
Use this method to notify chart that this series needs a refresh.
(Inherited from IntensitySeriesBase.) |
| InvalidateProperty | Re-evaluates the effective value for the specified dependency property (Inherited from DependencyObject.) |
| InvalidateStencil |
Invalidate stencil data.
(Inherited from IntensitySeriesBase.) |
| InvalidateValuesDataOnly |
Invalidate values data only. Use this together with Optimization = DynamicValuesData.
Does not update the geometry to the GPU when not needed, allowing significantly faster rendering.
(Inherited from IntensitySeriesBase.) |
| IsCoordinateOverCell |
Check if coordinate is over cell in the series.
(Inherited from IntensitySeriesBase.) |
| IsHighlighted |
returns true if the object is highlighted.
(Inherited from HighlightingItemBase.) |
| IsPositionOver |
Is position over series.
(Inherited from IntensitySeriesBase.) |
| LoadFromCSV |
Loads series data from a CSV file.
(Inherited from IntensitySeriesBase.) |
| ReadLocalValue | Returns the local value of a dependency property, if it exists. (Inherited from DependencyObject.) |
| RefreshRenderingData |
Rebuilds rendering data. Expert's method for allowing multi-threaded application to pre-build rendering data before rendering stage.
Rendering stage must always be synchronized to main thread, but this call can be called parallel for every series of this type.
(Inherited from IntensitySeriesBase.) |
| RemoveHighlight |
Removes forced highlighting.
(Inherited from HighlightingItemBase.) |
| SaveToCSV |
Saves series data into a CSV file.
(Inherited from IntensitySeriesBase.) |
| SetClipAreas |
Set clipping areas. Give null to disable all clip areas.
(Inherited from SeriesBaseXY.) |
| SetColorsData |
Sets colors. Doesn't update the Data array contents itself.
Very handy to make the chart render fast when the colors are being changed frequently,
especially with IntensityGridSeries' PixelRendering mode enabled.
(Inherited from IntensitySeriesBase.) |
| SetCurrentValue | Sets the value of a dependency property without changing its value source. (Inherited from DependencyObject.) |
| SetDataValue | [Missing <summary> documentation for "M:Arction.Wpf.Charting.SeriesXY.IntensitySeriesBase.SetDataValue(System.Int32,System.Int32,System.Double,System.Double,System.Double,System.Windows.Media.Color)"] |
| SetHeightDataFromBitmap |
Create data based on bitmap file contents. Data array will have dimensions of the bitmap Width X Height.
Use options to reduce resolution and smooth it if needed.
Height data of is calculated for each pixel from R, G, and B sum. 0 (black) will have the minimum value,
and maximum value is obtained from 3*255 (white). If bitmap has alpha value of 0, the data is set to -INF,
and the value is not drawn.
(Inherited from IntensitySeriesBase.) |
| SetHighlight |
Highlights the object.
(Inherited from HighlightingItemBase.)This is a kind of "forced" highlight, and the object might be highlighted even if the highlighting type (defined by Highlight property) is set to None. How the highlighting happens, if any, depends on object. Most objects use the defined type by default, and fall back to Simple highlighting if None is set. |
| SetProperCursor |
Set proper drag cursor. Default is hand.
(Inherited from UserInteractiveObject.) |
| SetSize |
Set grid size, both X and Y at same time. If you already have a large existing data,
using this method is faster than setting SizeX and SizeY separately.
(Inherited from IntensitySeriesBase.) |
| SetValue(DependencyProperty, Object) | Sets the local value of a dependency property, specified by its dependency property identifier. (Inherited from DependencyObject.) |
| SetValue(DependencyPropertyKey, Object) | Sets the local value of a read-only dependency property, specified by the DependencyPropertyKey identifier of the dependency property. (Inherited from DependencyObject.) |
| SetValuesData(Double, IntensityGridValuesDataOrder) |
Sets values. Doesn't update the Data array contents itself.
Very handy to make the chart render fast when the data is being changed frequently,
especially with IntensityGridSeries' PixelRendering mode enabled.
(Inherited from IntensitySeriesBase.) |
| SetValuesData(Single, IntensityGridValuesDataOrder) |
Sets values. Doesn't update the Data array contents itself.
Very handy to make the chart render fast when the data is being changed frequently,
especially with IntensityGridSeries' PixelRendering mode enabled.
(Inherited from IntensitySeriesBase.) |
| ToString |
Item to string.
(Inherited from SeriesBaseXY.) |
See Also